Where should a fire grate be placed?

A fireplace grate should be placed within the center of an open fireplace, allowing for a 3 inch gap between the edge of the grate and the walls of the firebox. The wider side of a fireplace grate typically faces towards the front of the fireplace.

What is the purpose of a grate in a fireplace?

The Role of Your Fireplace Grate Not only does this keep your fuel firmly in place, but it keeps it off the fireplace floor, as well. This helps your burn stronger fires and puts less wear and tear on your fireplace, as a whole.

How high should my fire grate Be?

If you plan on using a gas starter, it should be placed approximately 6″ from the fireplace back wall. The overall elevation of it should not exceed 2″.

What size grate do I need?

Making sure your fireplace grate fits your firebox correctly is crucial if you want the best performance from your fireplace. Once you have measured your fireplace, subtract 6″ from the front width, rear width and depth. These new dimensions will determine your maximum grate size.

How big should fireplace grate Be?

Once you have measured your fireplace, subtract 6″ from the front width, rear width and depth. These new dimensions will determine your maximum grate size.

What size should my fireplace grate Be?

How wide should my fireplace grate Be?

Once you have your measurements, follow these simple guidelines: The grate should be no wider than the back of your fireplace; dimension (A) shown above. Our grates come in widths of 11, 16, 21, 26, and 31 inches.

How big should your fireplace grate Be?

How big should my fire grate Be?

What is the purpose of a fire grate?

The fire grate, just like the andirons, improves the air circulation and burning in the fireplace and thus the draft of the fireplace. If you want to learn more about the purpose of fireplace grates or fire baskets , please read here: What is the purpose of andirons and fireplace grates?

What are fireplace grates made of?

Fireplace grates are typically made from either steel or cast iron. Steel fireplace grates are typically more favorable for wood burning fires, while cast iron grates can be more favorable for use when burning either wood and coal. There are two main materials used for the construction of fireplace grates:

What is the maximum size of fireplace grate?

The maximum size of fireplace grate will be 6 inches smaller than the minimum width and depth of the firebox. Sizing up the right fireplace grate is a relatively straightforward procedure.

Which side of the fireplace grate should face out?

Facing with the wider length of the grate out into the room, and the short side located at the back (if the fireplace is tapered and not rectangular). An old fireplace grate can be scrapped or refurbished and reused or sold on.