Is Nitronic 60 magnetic?

Is Nitronic 60 magnetic?

Nitronic® 60 is characterized by low magnetic permeability even after severe cold working and at cryogenic temperatures.

What Nitronic 60?

Nitronic 60 is a nitrogen strengthened austenitic stainless steel, with outstanding strength and resistance to wear and galling. It has corrosion resistance better than 304, and pitting resistance better than 316. It is also available in bar as a high strength version, Nitronic 60 HS.

Is Nitronic 60 hard to machine?

Nitronic 60 has a relatively low hardness compared to other nickel alloys, but has a much higher heat resistance due to a thin, adherent oxide film. Nitronic 60 has a machining cost factor of 9.0 when compared to steel 12L14. It can be readily welded.

How hard is Nitronic 60?

The yield strength of Nitronic 60 is nearly twice that of 304 and 316 stainless steels. Chloride pitting resistance is superior to that of type 316 stainless; Nitronic 60 provides excellent high temperature oxidation resistance and low temperature impact.

Does Nitronic 60 work harden?

Machinability. Nitronic 60 has a high work hardening rate, so although it’s machinability characteristics are similar to that of other austenitic stainless steels, the material will have to be held more rigidly and slower speeds used.

What is the hardness of Nitronic 60?

their hardness, where NITRONIC 60 is excellent in the annealed condition. These are minimum values for annealed bars up to and over 0.5” Diameter through 12” Bar. 17 8 8.0 4 0.14 Bal.

Is nitronic a cobalt based stainless steel?

This alloy provides a significant lower cost way to fight wear and galling compared to Nickel or Cobalt based alloys. This wear data republished from Armco brochure. NITRONIC is a trademark of AK Steel….

Specifications
Form Standard
Sheet ASTM A240 F899
Plate ASTM A240 F899
Fitting

What is the Rockwell hardness of Nitronic 60?

NITRONIC 60 properties

Wear Compatibility of NITRONIC 60 wear compared to Cobalt 6B and 17-4PH Against Various Alloys
Alloy Hardness NIT 60 (HRB 95)
304 HRB 99 6
316 HRB 91 4.3
17-4 PH HRC 31.5 4.9

Is Nitronic 60 a stainless steel?

Electralloy NITRONIC 60 Stainless Steel provides a significantly lower cost way to fight wear and galling compared with cobalt-bearing and high nickel alloys. Its uniform corrosion resistance is better than Type 304 in most media. Chloride pitting resistance is superior to Type 316.

Can Nitronic 60 be heat treated?

HEAT TREATMENT AK Steel’s ARMCO NITRONIC 60 Stainless Steel is not hardenable by heat treatment. Annealing at 1066 °C (1950 °F) followed by water quenching is recommended.

What type of material is Nitronic 60?

austenitic stainless steel
Nitronic 60 is a nitrogen strengthened austenitic stainless steel, with outstanding strength and resistance to wear and galling. It has corrosion resistance better than 304, and pitting resistance better than 316.

https://www.youtube.com/shorts/f8Qn1Ccu2XA