Does CerMark come in colors?

CERMARK MARKING MATERIALS There are many CerMark products for marking metals. The only colors that can be made are black, white and copper. The best known CerMark product for metals is LMM 6000 which has been used for many years to make black marks on items such as industrial parts and metal glasses.

Is CerMark permanent?

Laser markings made with CerMark are permanent unless it’s sanded off. Chemicals and the like cannot remove the bonding.

What is CerMark made of?

CerMark is made up of inert materials, such as, finely pulverized glass and metal particles. It does not contain any heavy metals and it is cadmium-free. This simply means that it is safe to wash down the sink in the cleaning process, contact with skin will not be harmful and special ventilation is not necessary.

Does CerMark work on silver?

CerMark ULTRA laser marking aerosol offers an improved formulation that creates exceptionally high-quality marks for almost every metal substrate. Specifically formulated to not stain or tarnish sensitive metals such as brass, copper, sterling silver, steel and others like other laser marking products can.

Does CerMark work on anodized aluminum?

Q: What will CerMark NOT work on? A: CerMark will not work on trophy brass, copper, gold (10k, 14k, 18k, 24k) and silver plated gifts. Also, no clear coated or anodized metals.

Does CerMark wash off?

Several laser test markings may be needed to find the best settings for chrome and other metals. Q: What should we use to remove the UN-engraved CerMark Ultra? A: Wash unused Cermark Ultra off with water and a soft nylon scrub brush, wet towel, or sponge.

Does CerMark work on stainless steel?

Hard metals like stainless steel can be marked at much faster speeds then softer metals like aluminum and copper which suck the laser heat away quickly. Many times brass and copper items will have a clear coating on them to prevent tarnish. These coatings prevent CerMark from bonding to the base metal.

Can you use CerMark on aluminum?

Cermark is to engrave all kind of metals but not zinc alloy.

Does CerMark rub off?

Q-Hi, I’m using Cermark LMM-6000 to engrave aluminum using a PureLaser 150W laser cutter. I’ve attempted this at 100% power with varying speeds, from 100mm/s down to 25mm/s (and higher speed, lower power settings). With each of these, the engraving still rubs and washes off easily afterward.

How long does it take CerMark to dry?

about 5 minutes
Let the CerMark dry completely. This should only take about 5 minutes. You can use a heat gun or hair dryer to speed up the drying process. When dried, the CerMark should be hard and not flake off the metal.

Does CerMark work on gold?

A: CerMark will not work on trophy brass, copper, gold (10k, 14k, 18k, 24k) and silver plated gifts. Also, no clear coated or anodized metals.

How do I remove a CerMark?

The Cermarked parts coming out of the tumbler look virtually identical to when they were put in.. I’ve had good luck with an air eraser and aluminum oxide as the blasting medium. Then buff flask ever so lightly with a wire wheel.

Can you use CerMark on glass?

The Tile & Glass Marking Solution can be used on glass or any type of ceramic or porcelain tile, making it a very versatile and useful product in your production setting. The CerMark Tile & Glass Marking solution is ready to use but MUST be shaken thoroughly.

How long does it take for CerMark to dry?

Let the CerMark dry completely. This should only take about 5 minutes. You can use a heat gun or hair dryer to speed up the drying process.

Is CerMark dishwasher safe?

New Ultra, designed for everything, allows you to make well-defined marks on glass and ceramic, but although the New Ultra may be dishwasher safe, we cannot guarantee that the user has found the perfect settings for a fully permanent mark (settings).

Does CerMark work with diode laser?

Q- Does Cermark Ultra work with the Diode Laser? A- Ultra should work if the laser is (CW) continuous-wave laser system, pulse systems will not. A- I would recommend the LMM-6904 Paste, it’s ready to use straight from the container, but this depends on the fiber laser used.