Who makes Evcon furnace?

Evcon Manufacturer Overview. The brand previously known as Evcon is now known as Coleman Heating and Air Conditioning. Coleman manufactures residential and light commercial air conditioners, heat pumps and gas and oil furnaces.

What does 4 flashes mean on a Coleman furnace?

CODE: Four red flashes. RESULT: Limit switch is stuck while open. FIX: Check for a a dirty filter, an improperly sized duct system, an incorrect blower speed setting, or a faulty blower motor.

Is Coleman same as Goodman?

Coleman is part of the Johnson Control group (York, Luxaire, etc.) Goodman is more end user oriented so that explains you different phone experiences.

Why is my Coleman furnace blinking red?

1 RED FLASH: This indicates that flame was sensed when there was not a call for heat. With this fault code the control will turn on both the inducer motor and supply air blower. A gas valve that leaks through or is slow closing would typically cause this fault.

What does a solid red light on my furnace mean?

If your oil furnace isn’t coming on, you may see a red light illuminated on the burner unit. When lit, this red light, also called a lockout light, indicates that a safety mechanism on your furnace has caused a shutdown because it has detected a problem or recognized a fault.

Where is the manual reset switch on a Coleman furnace?

1. Turn the Coleman furnace system switch to the “Off” position on the electric service panel.
2. Locate the manual reset switch near the left side of your furnace blower.
3. Press the reset button, which you will find in the middle of the limit switch.
4. Turn the system switch to the “On” position.

Is Coleman a good AC unit?

Coleman has a great reputation when it comes to the best central air conditioners (opens in new tab). Its units have SEER (Seasonal Energy Efficiency Ratio) ratings of around 16.4, which is average but still much better than the ratings on older generations of air conditioners.

Why does my Coleman furnace keep shutting off?

If your furnace keeps shutting off, it could be due to low airflow. There are several indirect issues that cause low airflow. Dirty Air Filters. If you don’t change your air filters often enough, the filters will become dirty and clogged, which means the heat exchanger retains heat and eventually causes it to overheat.

What is an Evcon furnace?

Evcon Furnace Overview Evcon, known today as Coleman, manufactures three series of gas furnaces. Models range from advanced modulating technology to entry level units and offer 80 to 98 percent AFUE. Several units in the Evcon/Coleman product line are Energy Star-approved.

Is York and Coleman the same company?

York bought the Coleman®Evcon name and product line in the mid-1990s, several years after the brand name was spun off. The original Coleman logo will be revived and put on hvac products, which move through separate distribution channels from the York and Luxaire lines.

How old is my Coleman Evcon furnace?

The date of production/manufacture or age of Evcon® HVAC equipment can be determined from the serial number located on the data plate.

Is Goodman better than Coleman?

Well on the surface, the Coleman has a higher seer, considerably higher. Coleman is part of the Johnson Control group (York, Luxaire, etc.) Goodman is more end user oriented so that explains you different phone experiences.

How often should you change your furnace filter?

The 90-day recommendation is for 1- and 2-inch filters. If you have a thicker model, the filter life extends. For 3- and 4-inch filters, plan for a replacement about every six to nine months. If you have the larger 5- or 6-inch filters, they will need replacing every nine to 12 months.

Is there a recall on the Coleman Evcon furnace?

The Feb. 3 recall notice for about 223,600 Coleman, Coleman Evcon, and Red T gas furnaces stems from an overheating problem that can cause a fire.

How many furnaces are being recalled?

About 223,600 gas furnaces are being recalled for the second time because they can overheat, causing the heat exchanger to crack and possibly cause a fire.

What should I do if my UPG furnace has been recalled?

Consumers should stop using the furnace until it has been inspected and repaired, and they should contact UPG to schedule a free inspection and repair of any furnace involved in the recall. For more information, including information about installation issues that may lead to the hazard, contact UPG at 888-665-4640 between 8 a. m. and 5 p. m.