What is EUcosil?

What is EUcosil?

EUCOSIL is a water-based sodium silicate solution used to densify and dustproof concrete. EUCOSIL chemically reacts within concrete and becomes an integral part of the surface, making treated concrete denser and easier to maintain. Treated concrete resists penetration of water.

What is an EUC diamond?

EUCO DIAMOND HARD is a unique blend of silicate and siliconate polymers that penetrate concrete surfaces and chemically react to provide an increase in surface density, durability, and abrasion resistance. Concrete treated with EUCO DIAMOND HARD is dust-proofed, resists tire marks, and is easier to maintain.

How do you use Eucosil?

Mixing: EUCOSIL is ready to use and requires no pre-mixing. Placement: Apply EUCOSIL to a concrete surface in a continuous film. Scrub the EUCOSIL into the concrete and brush out all puddles and runs immediately. All of the EUCOSIL should soak into the concrete.

How do you use euco diamond hard sealer?

Apply with high-volume, low-pressure sprayer, then scrub EUCO Diamond Hard into the surface with fine-bristled brooms or an auto scrubber. After keeping the entire surface wet with EUCO Diamond Hard for 30-40 minutes, the material thickens slightly and becomes gel-like.

How do you remove Super Diamond Clear?

Dried, cured SUPER DIAMOND CLEAR may be removed with a strong solvent such as EUCO SOLVENT, xylene/xylol, or MEK (always follow package directions and warning labels). EUCO CLEAN & STRIP is a citrus-based stripper that can also be used to remove this product.

How long does Super Diamond Clear 350 take to dry?

Protect freshly coated surfaces from rain or heavy fog for a minimum of 12 hours after application. Backrolling must immediately follow spraying, as this product dries quickly.

How long does wet look sealer last?

2-5 years
The Armor AR350 can last up to 2-5 years before the need to reseal. Surface porosity, environment, surface abrasion, and the amount of material applied will ultimately determine the life of the sealer.

Can you paint over wet look sealer?

Beautify, protect and preserve the natural beauty of all your home’s concrete & masonry surfaces with BEHR PREMIUM Concrete, Brick & Tile Wet-Look Sealer. This high-gloss formula can also be used on pavers, artificial stone and stucco, and it also makes a great topcoat over paints and stains.

How long does Super Diamond clear last?

– The Diamond Clear did fairly well with fading after 2 years and was on par with other solvent-based sealers containing similar amounts of acrylic.

When should I apply Super Diamond Clear?

Curing and Sealing: For the best cure of freshly placed concrete, apply Super Diamond Clear as soon as possible after finishing operations and/or immediately after the disappearance of the “sheen” of surface moisture.

How long does Super Diamond Clear 350 last?

3 years in original, unopened package. Sealing 450 to 550 400 to 450 Older Concrete (11.0 to 13.5) (9.8 to 11.0) Coverage will vary depending on surface porosity and texture. Thick applications or build-up of multiple coats can cause bubbling, whitening, and peeling.