Where is the model number on my LG dishwasher?

Where is the model number on my LG dishwasher?

The model and serial number will be on the back of the unit….

  1. Dishwasher. On the right side of the door, when opened.
  2. Refrigerators. Open the refrigerator door and look on the inside, right wall.
  3. Cooking Apliances. Wall Oven : Underside of the control panel. Microwave: On the cabinet behind the door.

How do I clear the error code on my LG dishwasher?

An HE error can usually be corrected by performing the following steps:

  1. Press the POWER button to turn the dishwasher off.
  2. Turn the circuit breaker to the dishwasher OFF and wait 10 seconds.
  3. Turn the circuit breaker to the dishwasher back ON.
  4. Press the POWER button to turn the dishwasher ON and start a new cycle.

How do I clean the filter on my LG lds5040st dishwasher?

LG Dishwasher : Cleaning the Filters

  1. To access the filter remove the lower rack.
  2. Turn the mash filter counter clock wise.
  3. Take out the mash filter, upper STS filter, and error filter.
  4. Clean the mash filter and STS filter with warm water and a soft sponge.
  5. To reinstall reverse the previous steps.

Why the LG dishwasher is not working?

Check that the dishwasher is plugged in and that a circuit breaker has not been tripped. Check that the water supply line is connected to the dishwasher, as it needs water to operate. Check that the door is completely closed, with the door latch working correctly.

What are the error codes for an LG dishwasher?

LG dishwasher error codes

  • IE. Not filling. Check/ Repair.
  • OE. Not draining. Check/ Repair.
  • AE or E1. Water leak detected. Check/ Repair.
  • FE. Water overflow detected. Check/ Repair.
  • tE. Thermistor (temperature sensor) failure. Check/
  • LE. Locked up circulation pump motor. Check/
  • HE. Heater failure. Check/
  • nE. Diverter motor failure. Check/

How do I clear the error code on my LG AE?

Once the water is soaked up or enough time has passed for the water to evaporate, turn off the circuit breaker and turn it back on to reset the dishwasher. Then run an empty cycle with nothing in it to clean out the dishwasher. If the error code occurs again, service will be required.

Why is my LG dishwasher blinking and not starting?

The heating element heats up the water to operating temperature. If the water doesn’t reach the proper temperature after a set amount of time, a light on the control panel might start flashing. To determine if the heating element has burned out, use a multimeter to test it for continuity.

Why is my LG dishwasher flashing and not starting?

If you find your LG dishwasher not starting after the door closes, the door latch may not be engaged. To prevent leaks, the latch secures the door and signals the door switch to start a wash cycle when engaged.

How old is my LG dishwasher?

To determine a LG appliance age you need the serial number. The first digit is the year, the second and third is the month. In the above example the Manufacture date would be March of 2005.

How do I find the year of my LG washer?

LG appliance serial number age finder: To determine a LG appliance age you need the serial number. The first digit is the year, the second and third is the month. In the above example the Manufacture date would be March of 2005.

Why is my LG dishwasher flashing?

Why is my LG dishwasher beeping?

If your dishwasher starts beeping, it is probably a sign of either incorrect use or a part that needs replacing. Electronic appliances such as dishwashers often come inbuilt with electronic sensors, which may make beeping sounds or display blinking lights to caution the appliance user that something is wrong.