How much horsepower does a 2008 Mercury Milan have?

160 to 221 hp2008 Mercury Milan / Horsepower

Is the Mercury Milan fast?

According to ProfessCars™ estimation this Mercury is capable of accelerating from 0 to 60 mph in 6.9 sec, from 0 to 100 km/h in 7.8 sec, from 0 to 160 km/h (100 mph) in 18.9 sec, from 0 to 200 km/h (124 mph) in 35.2 sec and the quarter mile drag time is 15.5 sec.

What type of engine is in a 2008 Mercury Milan?

2.3 L 4-cylinder
3.0 L V6
2008 Mercury Milan/Engine

Is a Mercury Milan Premier a good car?

Most reliable car I’ve Owned This car was the most reliable car I have ever owned. have had a number of new and used cars, I found the Mercury Milan to have great styling, handled beautifully, and never broke down. I always wonder why they stopped making this model. Rating breakdown (out of 5): Comfort 5.0.

Does a 2008 Mercury Milan have a CVT transmission?

The V6 gets an EPA-rated 26 mpg on the highway and comes with a six-speed automatic transmission, a rarity in this class that gives both better acceleration and better fuel economy than a five-speed automatic….Retail Price.

Engine	2.3L I-4
Drivetrain	front-wheel

What kind of engine does a Mercury Milan have?

Acceleration and Power Both the V-6 Milan and V-6 Premier trims are powered by a 3.0-liter six-cylinder engine that makes 221 horsepower and 205 pound-feet of torque.

Does a 2008 Mercury Milan have a timing belt or chain?

car runs a little rough at idle, vibration . Although you did not share whether you have the 4 cylinder or V6 model, both have a timing chain.

Is Mercury Milan same as Ford Fusion?

The Milan did not receive a counterpart of the Ford Fusion Sport, powered by a 3.5L V6. The four-cylinder engine was equipped with a five-speed manual transmission as standard (the first manual-transmission Mercury sedan since the 2000 Mystique), with a five-speed automatic as an option.

Is a Mercury Milan an all wheel drive car?

Overview. The Mercury Milan is a midsize sedan with available all-wheel drive.

Are Mercury Milans expensive to maintain?

The estimated cost to maintain and repair a Mercury Milan ranges from $95 to $2498, with an average of $256.

What transmission is in a 2008 Mercury Milan?

5 & 6-speed automatic
5-speed manual
2008 Mercury Milan/Transmission

How do you know if you need a timing belt?

5 Common Signs Your Timing Belt Needs to Be Replaced

1. Engine Makes a Ticking Noise. When the timing belt starts to wear out, it may create a ticking sound inside the motor.
2. Engine Won’t Turn Over.
3. Engine Misfires.
4. Rough Idling of the Engine.
5. Decline in Oil Pressure and Oil Leaking.

Is Mercury Milan a compact car?

The Mercury Milan is a mid-size car that was marketed by the Mercury division of Ford Motor Company.

When did they stop making the Mercury Milan?

The Mercury Milan is a midsize sedan with available all-wheel drive. Released for 2006, this model was produced through 2011 and then canceled as the Ford Motor Company discontinued the Mercury brand. The Mercury Milan was based on the Ford Fusion and introduced as the replacement for the Mercury Sable.

At what mileage should a timing chain be replaced?

between 80,000 and 120,000 miles
Every time you use the engine, the timing chain is in use. When does a timing chain need to be replaced? The timing chain normally needs to be replaced between 80,000 and 120,000 miles unless there is a specific problem. Issues with the chain are common in higher mileage vehicles.

Will a bad timing chain throw a code?

A stretched timing chain contributes to poor engine performance and increased emissions, triggering the check engine light and the storing of a diagnostic trouble code. A mechanic will need to inspect the code and prescribe the necessary repairs.

Can I replace timing belt myself?

But if you are and you enjoy doing your own repairs or restorations then it’s something you can do yourself, and save on some big repair bills in the process. We’ll walk you through the process of replacing a timing belt and water pump step by step, starting with the tools you’ll need.

How much does it cost to replace a timing belt?

between $500 and $1,000
Depending on your vehicle, a timing belt service could turn into a big deal and it’s going to be costly. Having a timing belt replaced before it breaks will cost between $500 and $1,000 on average while waiting for it to break before replacing can cost upward of $2,000 or more.

Will a broken timing chain destroy my engine?

If the timing chain breaks, the loose metal rolling around inside the motor can lead to serious engine damage.

How much does it cost to have a timing chain replaced?

Timing chain replacement can cost between $600 and $800 for a DIY repair, or between $1,600 and $1,800 with a mechanic. The cost is high due to the complicated nature of replacing this part. If you want to DIY a timing chain replacement, the parts will cost around $650.